Car hail protection cover, car cover Premium Hybrid, hail protection cover SUV/VAN Size 6

• Max. vehicle length: 424 cm
• Scope of Delivery: 1 hail protector cover, 3 bungee cords
• Features: Easy Mounting, Weather Protection , Durable, Water Repellent
• Material : EVA, Polyester, Polypropylene, Polyurethane
• Colour : anthracite-black
• Packaging dimension: 530 x 490 x 370mm

Amazing Hail Protection

When heavy, threatening clouds are forming, those of you who do not have a garage often have to leave their car parked outside on a private parking space. Then a heavy hailstorm starts, and everyone will be hoping that their car will not be damaged. However, you can watch the drama calmly as you have already discovered the best possible protection for your car with our Premium Hybrid hail protector cover SUV

Premium material quality for optimum hail protection

The hail protection cover is made of particularly high-quality and specially developed, registered hybrid foam. The foam consists of an approximately 7mm thick layer, which ensures optimal hail absorption and puncture protection. The Premium Hybrid SUV hail protector cover has been tested for its hail protection effectiveness under controlled conditions by simulated hailstone impact using a drop test. This consisted of dropping steel balls of 3 differing weights from varying heights onto a car bonnet fitted with a hail protector cover. The effect of the impact of the steel balls was then verified visually based on the dents formed in the car bonnet. The test results showed that the Premium Hybrid SUV hail protector cover provides protection from hailstones up to a size of approx. 14mm in diameter with an impact velocity of 70km/h.  In total the cover has a thickness of about 8 mm. On the inside, a car paint friendly fleece is attached and the outer layer is made of water-repellent material. In addition, the side material is completely waterproof. There are 4 reflectors around the SUV and the red fluorescent edging increases the visibility of the vehicle.

Easy mounting

The hail protection cover is manufactured in four different sizes and is relatively easy to mount with its elastic seams. At the bottom of the car, the cover is fastened at the front and rear by means of a snap-lock system. Only install the hail protection cover on vehicles that are parked on non-public traffic areas. Remove the hail protection immediately after the storm, as it is not suitable for long-term use and becomes brittle due to long-term UV radiation. Please note that condensation and moisture can form under the cover if it rains heavily for a long time and the air is very damp or the ground very wet. Condensation can also form under the cover when temperatures fluctuate strongly. This happens regardless of whether the cover is waterproof or not. It is therefore all the more important to regularly remove the protector cover from the car and ventilate and dry it.

Other customers who have bought a hail protection cover have often asked:

• How is the hail protection cover attached?
  Attach the cover to the underside of the car with the sewn-in arrow pointing forwards, using the snap fasteners and firmly pull the straps.
  
• Why should the hail protection cover be removed after a thunderstorm?
  If the cover remains on the vehicle for a prolonged period of time, moisture can form underneath, which can significantly reduce the lifetime of the cover. We recommend removing the cover after the thunderstorm has passed and drying it thoroughly before using it again.
  

Please note: Our hail protection covers are not UV-resistant. Direct UV radiation damages the cover and reduces the lifetime of the cover. Therefore, please remove it after use and do not leave it on the vehicle permanently!