Car hail protection tarpaulin Perma Protect size S

Prevent the next hail damage of your car! Secure yourself effectively and protect your vehicle with a high-quality hail protection cover from Walser. Our product development is based on know-how and experience, so that you can rely on the first-class quality of our hail protector car cover.

All details about Hail Protection Cover Premium Hybrid

• Hail Protection Cover Size S
• Measures: length 400 x width 162.5 x height 117.5 cm
• Color: anthracite / silver / orange
• Hail protection: vertical up to 70 km / h, and hailstones up to a volume of approx. 700 mm³
• Material: ca. 4 mm thick, neoprene foam
• Optimal hail protection
• Not suitable for foiled vehicles
• Best protection against hail, ice, snow, pollen, small falling branches, bird droppings, chestnuts etc..

Available for many vehicle models

The measurements of our hail protection cover are length 400 x width 162.5 x height 117.5 cm, corresponding to size S. This size is suitable for many vehicle models. This silver hail protection cover can be used, among others, for the following vehicle brands and types:

• Chevrolet Matiz und Spark
• Citroen 2CV, AX, C1, C2, C-Zero und Saxo
• Daewoo Matiz und Nexia
• Daihatsu Cuore, Feroza, Sirion und Terios
• Fiat 500, Cinquecento und Seicento
• Ford Ka und Ka 0.9
• Honda Civic 1300, CRX, Jazz, Jazz Hybrid und Logo
• Hyundai Atos, Getz, i10 und Pony
• KIA Picanto
• Lancia, Y, Y1.2 und Ypsilon
• Mazda 121 und Demio
• Nissan Micra
• Opel Adam, Agila, Karl, Tigra und Tigra-A
• Peugeot 106, 107, 205 und Ion
• Renault Twingo
• Seat Arosa und Mii
• Smart Forfour CDI, Fortwo Cabrio, Fortwo CDI, Fortwo Coupe und Roadster
• Subaru G3 X-Justy, J10 und Justy
• Suzuki Alto, Ignis, Samurai, Splash, Swift, Swift 4x4 und Swift Sport
• Toyota Aygo, IQ und Starlet
• VW Fox, Lupo, Lupo 3L, Lupo GTI und Up!

Attention: The indicated vehicle models are only guide values. For this reason, please compare the given measurements with those of your vehicle! Please check on our vehicle type list which size is suitable for your vehicle!

Great material quality for ideal hail protection

The hail protector cover is made of a foam layer which is approximately 4mm thick and ensures great hail impact absorption and puncture protection. On the inside, a fleece layer is soft on the paintwork, while the outer layer is made of water-repellent material. In addition, the side material is also water-repellent and coated in silver colour. There are 4 reflectors attached to the outside as well as orange fluorescent tapes for increased visibility.

Easy mounting

The hail protector cover is manufactured in five different sizes and can be relatively simply pulled over the vehicle due to the elasticated seams. The hail protector cover is fastened under the car by a snap fastener to prevent it from being blown away. The hail protector cover must only be used on parked vehicles on areas off the public roads and should be removed immediately after the storm is over.

Park your car safely

There are big, threatening clouds and your car is parked outside because you do not have a garage. Then it starts to hail heavily, and everyone hopes the car will survive this storm. However, you can watch the spectacle with peace of mind as your car is completely protected from hail damages by the hail protection cover.

Fully padded for optimal hail protection

The hail protection cover is completely upholstered with a 4 mm thick neoprene foam layer. This absorbs the impact of the hail very well, whereby the hood, the roof and the boot are well protected against hailstorm. In total the cover has a thickness of about 5 mm. The product is water-repellent and has a fleece on the inside that is gentle on the paintwork. There are four reflectors on the outside and the ultra-orange tapes add visibility. In addition, there are two ventilation openings to ensure good ventilation.

Easy installation

The cover is manufactured in five different sizes and is relatively easy to install with elastic seams. Attach the hail protection cover with the sewn-in arrow to the front on the bottom of the car with the attached snap fasteners. Mount the hail protection cover only on parked vehicles in non-public traffic areas and remove it immediately after the storm is over.