Car hail protection tarpaulin Premium Hybrid size XXL
- Protects against hailstones up to 1400 mm3
- material thickness two layers: 4mm + 3mm foam
- The premium hail protection for your vehicle
Prices incl. VAT free shipping
- Kostenloser Versand und kostenlose Retoure
- Produkt auf Lager und in 1-3 Werktagen bei Ihnen
- Gastbestellung und Bezahlung per PayPal und Rechnung möglich
- Unser 5-köpfiges Team berät Sie kostenlos zu allen Fragen per Telefon und E-Mail mehr Infos
- Versand mit DHL oder DPD (wie gewünscht)
Ready for immediate dispatch
- Item No.: 30972
Make sure your car is parked safely!
When heavy, threatening clouds are forming, those of you who do not have a garage often have to leave their car parked outside on a private parking space. And if it starts to hail heavily, then everyone will be hoping that their car will not be damaged. But if you have already discovered the best possible protection for your car with our Premium Hybrid hail protector cover then you can sit back and calmly watch the drama unfold outside.
Premium material quality for ideal hail protection
The hail protector cover is made of a particularly high quality hybrid foam that has been specially developed and patented. The foam layer is approximately 7 mm thick and ensures optimum hail impact absorption and puncture protection. The Premium Hybrid hail protector cover has been tested for its hail protection effectiveness under controlled conditions by simulated hailstone impact using a drop test. This consisted of dropping steel balls of 3 differing weights from varying heights onto a car bonnet fitted with a hail protector cover. The effect of the impact of the steel balls was then verified visually based on the dents formed in the car bonnet. The test results showed that the Premium Hybrid hail protector cover provides protection from hailstones up to a size of approx. 22mm in diameter with an impact velocity of 70km/h. In total the cover has a thickness of about 8 mm. On the inside, a fleece layer is soft on the paintwork, while the outer layer is made of water-repellent material. In addition, the side material is also water-repellent and coated in silver colour. There are 4 reflectors attached to the outside as well as red fluorescent tapes for increased visibility.
Easy mounting
The hail protector cover is manufactured in five different sizes and can be relatively simply pulled over the vehicle due to the elasticated seams. The hail protector cover is fastened under the car by a snap fastener to prevent it from being blown away. The hail protector cover must only be used on parked vehicles on areas off the public roads and should be removed immediately after the storm is over. Please note that condensation and moisture can form under the cover if it rains heavily for a long time and the air is very damp or the ground very wet. Condensation can also form under the cover when temperatures fluctuate strongly. This happens regardless of whether the cover is waterproof or not. It is therefore all the more important to regularly remove the protector cover from the car and ventilate and dry it.
Suitable for cars up to the following size: ca. 575x203x120 cm (Length x Width x Height)For this reason, we have a large number of voluntary inspections carried out in addition to statutory requirements. Most of our products are also regularly inspected by accredited, independent testing institutes such as TÜV Rheinland LGA Products GmbH or TÜV Austria and certified with a test mark if the result is positive. Learn more about safety at WALSER and our innovations.
